PowMr 60a Charge Controller – Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current / Capacity and Timer Setting ON/Off with 5V Dual USB

Price: $22.99
(as of Feb 15, 2026 00:50:33 UTC – Details)

Product description

Features

This solar power regulator protected with the moisture-tight coating, minimizing damage from humidity and from nesting insects. Suitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system.Fit for Lead-acid batteries(OPEN,AGM,GEL) with multiple load modes.Automatically manage the working of solar panel and battery in solar system.ADD features: Charge and Discharge Current, Charge and Discharge energy recording function.Dual MOSFET Reverse current, protection from lightning strike.Automatic Induction: It will be auto open or close the load when you set the timer to be Light and Time mode.Dual USB supply power to two mobile phones, tablet PCs, and other devices that require max 5V 2.5A power.

Eight PWM Charge Controller Protection:

Dual MOSFET Reverse current / Overheat protectionUnder-voltage discharge protection / Short-circuit protectionOpen-circuit protection / Over-load protectionOver-charging protection / Power off memory protectionSuitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system.

Common Q&A

Your satisfaction is our priority.

How to install?

A: (1)Battery —>(2)Solar panels —> (3)DC load. Disconnect order is (1)DC load —>(2)Solar panels —> (3) Battery

Q: What battery type is this controller supported?

A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.

Q: Why the LCD screen become blank?

A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default).

Q: Why does the controller display 14.4V?

A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don’t worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V.

Q:How is it set to charge battery during the day and turn on at dusk?

A: Press the [DOWN]button to ON/OF load manully at main display （The load can’t be switched manually in the light control state.）

There are 3 options for the working mode.

Mode 1 : [24HR] >> Load output 24 hours

Mode 2 : [1-23HR] >> Load on aftersunset and dosed after setting hours

Mode 3 : [0H] >> Dusk to Dawn

Tips

Charge Controller should connect in the order of 1)Battery array 2)Solar panels 3)DC load .The disassembly sequence is contrary to the wiring order.Let the children keeps far away from the storage battery and the controller.Make sure batteries’s voltage between 9V-15V for 12Volt system and 18V-30V for 24Volt system so that the Charger controller can recognize the normal battery type and system in first connection.Parameter Setting Rules：Floating voltage > Low voltage reconnect > Low voltage dischargeThe solar controller will stop output when the battery under 10.7V(adjustable).The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V(adjustable).Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment.Connect the inverter (DC / AC) to the battery. DO NOT connect to the solar controller.The LCD display has an error of 0.2 V- 0.3 V, but this is normal .Do not open the heat sink of the solar controller without permission.

PACKAGE LIST

1 x 60 amp Charge Controller1X English User Manual

Customer Reviews

Price

PowMr

🙌 This 60a charge controller compatibility with 12V and 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float), 12V(780W) / 24V(1560W) input, Dual USB can give your electronic product max 5V 2A.
🙌 Backlight LCD display PV/ Battery/ Load charge and discharge parameter. Adjustable Floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. ADD Feature: Charge and Discharge Current, Charge and Discharge energy recording function.
🙌 This solar charge controller fit for Lead-acid batteries (OPEN,AGM,GEL) with mutiple load timer. Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
🙌 PWM charge controller Protection – Dual MOSFET Reverse current/ over heat /Under-voltage discharge discharge / short-circuit / open-circuit / over-load/ over-charging protection. More safe using for home, industrial, commercial etc.